Models · Batteries

Dyness DL5.0C 5.12 kWh: dL5.0C is the 5.12 kWh default. Keep the stack identical.

یہ گھر کی ڈیفالٹ بیٹری ہے۔ ساتھ صرف اسی جیسی بیٹری جوڑو۔

Brand page: Dyness. Profile: battery type. Count: pack count. One-pack guide: 5.12 kWh.

Dyness DL5.0C is the 5.12 kWh, 51.2 V wall the house stack means when the brand is Dyness. Do not round the nameplate into a bigger story. One pack at that size is the default residential LFP on the brand page, and the brand page at Dyness stays canonical. This URL is the pairing and the stack rule. Closed-loop communication is the point. The profile is the word the pairing sheet names, often Dyness or a PYL-style word, confirmed on the sheet rather than remembered. The battery-type page is battery type.

Tower and Pro stacks are the same family when the brand page says so. They are not mixed with a 24 V DL2.5 on a 48 V hybrid. They are not mixed with a smaller Knox wall because both cartons feel like lithium furniture. Cap charge and discharge at the sheet in hand. This page does not lock a current the sheet does not show, and it does not print a default. First charge goes to full, indoors, under a hot-room limit. Rupees stay on the dated prices page at prices.

DL5.0C is the default 5.12 kWh wall, not a rounded headline

The kilowatt-hours on the carton are the kilowatt-hours in the quotation. 5.12 is not "about five" when the buyer is comparing night loads, and it is not "a bit more" because the case looks tall. The one-pack guide is 5.12 kWh. Use it for what one wall covers. Do not rewrite it here as a new hour table. A typical shed of fans and a fridge is the one-pack conversation. A night 1.5-ton wants about two. Counting onward is the pack count guide, which stays canonical for the larger steps.

Four fans at about 300 W are the sort of evening load a single house wall is asked to carry, along with lights and a router. That is a picture of the load, not a promise that every fridge and every fan motor behaves the same. Night air-conditioning is a second pack, not a setting that deepens the first wall. If the quotation says one DL5.0C and also says a night 1.5-ton for many hours, the quotation is arguing with itself. Fix the count before the deposit.

Indoors, with air, and not in a tin box on the June roof

The wall lives indoors, with air. A tin box on the June roof in Multan is the wrong room. Heat is why. The hot-room limit is a limit, not a dare. This page does not invent a threshold temperature the sheet does not print. If the sheet names a range, the sheet wins. Multan heat is the town context, not a licence to park lithium in a metal shed at roof level. A pack that is hot to the touch, swollen, or smelling is a stop. Isolate if safe, leave if there is smoke, and call local emergency services. We do not teach a suppression method.

The communications lead has to be seated at handover, and a photograph of the profile on the inverter is part of that handover. We do not publish a pinout. Seated means the lead the manual names is actually connected and the inverter shows the closed loop. It does not mean a homemade plug or a guessed colour order. If the loop is down, the fault is loss of communication, not a prompt to type USE and walk away.

An identical Dyness stack is the only stack we will add

Adding energy means identical packs, and only the count the manual allows. Tower with a DL5.0C shares a stack only if the sheet says those SKUs parallel. Otherwise keep one family. A Knox 4.15 kWh wall beside a DL5.0C is refused even when both are called lithium. Different energy and a different current limit in one parallel group is how the night cuts out and the warranty argument starts. Say the family, say the kilowatt-hours, and stop if they differ.

High-voltage Huawei LUNA is not this product. The class warning is HV battery. Series-strapping DL5.0C walls to imitate that high voltage is refused. The battery management, the voltage, and the inverter input are a designed set on the high-voltage side. A homemade string destroys packs. A Nitrox-class BAT port is where a 51.2 V wall belongs. It is not where LUNA belongs, and a DL5.0C does not change class because several of them were bolted in a line.

The profile is the sheet's word, and PylonView is the wrong app name

Often the list says Dyness, or a PYL-style word. Often is not always. Confirm the word on the pairing sheet and on the carton. If they disagree, the carton wins. PylonView is not the Dyness app. Do not hand the owner a Pylontech tool and call the handover done. The app name is whatever the carton prints. Grey installs are refused. We do not host firmware. Charge current and discharge current are capped at the sheet. Asking us to "just put a hundred" is asking for the number we deliberately do not print.

A 24 V inverter does not receive this wall. DL2.5 is the 24 V name in this family, and it does not get dropped onto a 48 V hybrid to use up a shelf. The house hybrid that takes the DL5.0C is the 48 V class machine, the 6 kW IP65 hybrid in the ordinary domestic picture. Crossing classes because the wall was already in the van is the walk-away. Voltage is identity, not a detail for the end of the day.

Handover is a photo of the profile, not a verbal "it's on CAN"

The owner should see the inverter acknowledge the pack, the profile name, and the pack count that was paid for. One wall is one wall. Two walls are two, identical, and allowed by the manual. A verbal assurance that communication is fine, with the lead hanging loose, is not handover. Zarkaar Power is the solar desk of Zarkaar Group (Pvt.) Ltd. in Multan. Questions on a real carton go to 0300 0465810 or info@zarkaarpower.com. The page date is 2 October 2026. Dated rupees are not restated here.

What one default wall will not be asked to pretend

It will not pretend to be LUNA. It will not pretend to be a Knox 4.15. It will not pretend to be a tubular bank. It will not pretend that USE is a clever compatibility mode. It will not live on a roof in a closed tin. It will not be series-connected to chase a high-voltage brochure. Those refusals are the product boundary. Inside the boundary, DL5.0C is the default 5.12 kWh Dyness wall, charged and discharged at the sheet, indoors, on the profile the sheet names.

The pack-count guide remains the place where two, three, four, and six identical packs are chosen against a night load. This page does not invent a seventh size or a private hour table that would disagree with those guides. If the BMS manual in hand stops at a lower count, the manual stops the stack. Our index does not outrank it.

The decision on this DL5.0C page is that the default Dyness house wall is the printed 5.12 kWh at 51.2 V, kept identical if you add more, kept off USE, and kept off any homemade high-voltage string. That decision would be false on the Knox LIO page, where the trap is a 4.15 kWh wall of a different brand, not this Dyness default.

Send a ticket WhatsApp 0300 0465810